Delta WASP 2040 Clay

From 3.300 € + VAT

Accurate and fast using all ceramic materials. Clay 3D printer open and accessible on three sides to interact during the prints. Compact professional clay 3D printer, prints up to 40 cm in height.
Made in Italy delta 3D printer, with a clean design and compact dimensions. The aluminum and steel structure guarantees stability and precision, obtaining quality prints with dense fluid materials.

Ask for a quote

Print examples

Specs

Printing volume: Ø200mm x h400 mm;
Minimum layer height: 0,5 mm;
Maximum print speed: 150 mm/s;
Maximum travel speed: 150 mm/s;
Acceleration: 500 mm/s2;

Materials

Porcelain
Earthenware
Gres
Clay
Others

Configurable tools

LDM WASP extruder with 1.2 mm, 2 mm nozzle (standard)

Software

Operative systems WIndows, Mac, Linux;
Slicing software compatible with all slicing software (Cura – SLic3r – Simplify3D®);
File type .stl, .obj, .gcode;

Interface

SD Card
LCD Screen

Physical dimensions

Input 220/240 V 50/60 Hz (110 V available)
Absorbed power 180 W
N.B. air compressor needed (min. pressure 8 bar)

Temperature

Use 20-30 C°;
Warehouse 0-30 C°;

Mechanics

Frames and carters metal sheet (lowers the machine vibrations, grants the best print quality), aluminum, painted steel
Print bed bed in wooden multi-layer
Movements guides on anodized aluminum, open sides give the possibility to stop the printer and interact with the part during the print

Technical improvement

Extruder with controlled dosage thanks to a screw (2013)
Controlled air pressure on the printer
Perfect stability thanks to new sliding-system on bearings
Air pipe connection integrated into the printer
Dedicated Firmware

Extras

RESURRECTION SYSTEM
A system which allow users to save their print job and resume it in the case of power failure.
FREE Z-SYSTEM
The machine measures the height of interruption of the print and it restarts there.

Do you have any questions?

See our FAQs