Build volume Ø 200 x h 400 mm
Heated active chamber heated up to 70°C
Minimum layer height 50 micron
Print speed max(*) 300 mm/s
Travel speed max(*) 500 mm/s
Acceleration(*) 10.000 mm/s2
Bed temperature max 120 C°
Extruder / Nozzle diameter standard: WASP ZEN X Extruder with MT cartridge, nozzle 0,4 mm
* All data relative to speed make reference to a Delta WASP 2040 Industrial 4.0 with WASP ZEN X Extruder 0.4 mm
WASP MATERIALS
Suitable filaments
Ø1.75 with “WASP ZEN X Extruder”
Ø2.85 with “WASP FLEX Extruder”
ABS WASP
HIPS WASP
PA CARBON WASP
PMMA WASP
TPU *only with WASP FLEX Extruder
OTHER MATERIALS:
PLA
PETG
PC
PC+ABS
PPS
PVA
ASA
TPE *only with WASP FLEX Extruder
PP *only with WASP FLEX Extruder
ZEN X EXTRUDER dual extruder for single material, multicolor or multimaterial prints, with end filament sensor.
Nozzle diameter: 0.4 mm, 0.7 mm (filament diameter 1.75 mm)
FLEX EXTRUDER direct driven extruder for flexible material down to shore 50A.
Nozzle diameter: 0.4 mm (filament diameter 3 mm)
Operative system Windows, Mac, Linux
Slicing software compatible with all slicing softwares (Cura – SLic3r – Simplify3D®)
File type .stl, .obj, .gcode
Pendrive USB
Wifi network
Display TFT touch
Dimensions 49 cm x 44 cm x 87 cm
Machine weight 38 kg
Dimensions and weight for the packaging on pallet 50 cm x 58 cm x 114 cm, weight 42 kg
Input 220/240 V 50/60 Hz (110 V available)
Absorbed power
WASP ZEN Extruder: 120 W max
Hot bed: max 500 W
Room heater: max 750 W / average 300 W
Use 20-30° C
Warehouse 0-30° C
Frame and cover: aluminum, steel, polycarbonate, PU. All metal body for a stiff and vibration free precise machine
Bed: machined aluminum
Movements: nylon wheels on anodized aluminum sliders, PU steel core belts, resistant to high temperature
Insulation: polymer foam for thermo-acoustic insulation
Motors: Stepper
Continuous Print: when the used extruder runs out of filament, the print continues with the other extruder (if correctly loaded)
Bed touch system: automatic system that avoids the collision of the extruder on the plate.
Gcode analyzer: gcode error checking system.
Auto check system: automatic error recognition routine
Mesh auto calibration: mesh plate calibration
Hot and Cold tecnology heated chamber and cooling of the mechanics
WIFI machine connected to the network for monitoring and control
New GUI new touch interface with bigger TFT display
Camera on-board for monitoring and timelapse
Remote intervention WASP technicians can work from remote on your machine in case of issues
RESURRECTION SYSTEM (cc)
The system recovers automatically interrupted prints in case of accidental shutdown or blackouts.
FREE ZETA SYSTEM (cc)
It’s possible to measure the height of interruption of the print and restart from there.
SUSPENDED BOWDEN (cc)
It makes possible to download the inertia on the hanging rubber-bands, improving like that the printing speed and quality.