Delta WASP 40100 Clay

From 7.590 € + VAT

Ceramic 3D Printer fast and accurated with any kind of ceramic material. It’s open and accessible to each of the 3 sides to allow operator’s interaction during the printing process .
For objects taller than 40 cm and up to 1 m. you can even print directly from the floor , on the contrary for very little objects you can print using an additional steel printing plate that can be mounted at 60 cm from the floor ( printing volume 400 mm x 450 mm Hight).
If you move the 3D printer in an other place it continues printing with no interrupion. you do not need to wait till the first object has dried.

Ask for a quote

Print examples

Specs
Printing volume: Ø 400mm x h 1000 mm; (h 450 mm with interim plate)
Minimum layer height: 0,5 mm;
Maximum printing speed: 150 mm/s;
Maximum travel speed: 150 mm/s;
Acceleration: 500 mm/s2;
Materials
porcelain 
earthenware
gres
refractory materials
clays
others
Suitable tools
LDM WASP Extruder: 1.5, 2, 3 mm nozzle diameter (standard)
LDM WASP Extruder XL:  4 mm, 6 mm, 8 mm nozzle diameter
Software
Operative systems: WIndows, Mac, Linux;
Official Slicing: Simplify3D®
Compatible Slicing: Cura, Slic3r
File type: .stl, .obj, .gcode;
Interface
SD Card – Schermo LCD;
Physical dimensions
Dimensions: 77 cm x 85 cm x h 195 cm (h 270 cm with tank support)
Machine weight: 80 kg
Dimensions for shipping the machine with wooden packaging: 100 cm x 100 cm x 230 cm, weight 130 kg
Supply
Input: 220/240 V 50/60 Hz (110 V available);
Absorbed power: 200 W
N.B.: air compressor needed (min. pressure 8 bar)
Temperature
Use: 20-30 C°;
Warehouse: 0-30 C°;
Mechanics
Frames and carters: metal sheet (lowers the machine vibrations, grants the best print quality), aluminum, painted steel
Print bed: bed in wooden multi-layer
Movements: guides on anodized aluminum
Open sides give the possibility to stop the printer and interact with the part during the print
Technical innovation
No stop print: You can move the printer and not remove the object – each time the printing process has finished (this avoids to wait till the object has dried)
Printing or from ground or from 2 printing beds at different Height
Extruder with controlled dosage thanks to a screw (2013)
Controlled air pressure on the printer
Perfect stability thanks to new sliding-system on bearings
Dedicated Firmware
Extras
RESURRECTION SYSTEM
A system which allow users to save their print job and resume it in the case of power failure.Read more about Resurrection System
FREE Z-SYSTEM
The machine measures the height of interruption of the print and it restarts there. Read more about Free Z-System

Do you have any questions?

See our FAQs